Glatzan is thinly and uniformly applied by brush to a head form and
allowed to dry. After the surface has dried, this procedure should be
repeated at least three times, in order to reach the required material
thickness. The outer borders of the cap, however, should consist of only
1 or 2 layers, to provide an especially thin edge for fine transitions.
After application of the last layer, the bald cap should be allowed to
thoroughly dry all the way through (for 6-12 hours). It can then be
thoroughly powdered and carefully removed from the head form. The
removal process should start at the nape of the neck and then proceed
slowly in the direction of the forehead. Bald caps created in this way
should be used only after the fumes have completely dispersed, and after
there is no greatly noticeable smell of solvent.
Details: 1000 ml