Ash Blonde. light brown, slightly golden sandy colour. Medium density and dries fast. When washed, leaves yellow/green stains on fabric. Very popular colour. Try using with Dark and Mid brown for a shading effect. Start with Dark Brown and shade into Ash Blonde.
Ageing Sprays – Usage Instructions
spray may cause permanent staining. Test before use on off-cuts or
hidden surfaces, and then wash to check for any staining.
Ensure surfaces are dry and grease free.
Mask areas not to be sprayed.
Shake can before use.
Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied.
Hold can upright 30cm (12 inches) away from the surface, and spray
across the surface in one smooth sweep, keeping the nozzle fully
depressed. Spots of concentrated dye may appear if the button is only
For small patches, spray through holes cut in a piece of paper.
For dark patches, spray closer to the surface.
Heavy spraying may drip or puddle.
Smear the spray by re-wetting with water, and then dabbing or rubbing
with a damp or wet cloth. With some fabrics it’s easier to smear by
wetting the sprayed fabric and then rubbing the wet area together
between your hands. Smearing is easier when the spray is still wet, but
is also possible after the spray has fully dried. It may not be possible
to smear spray applied to absorbent surfaces.
May not adhere to some polished surfaces.
Our ageing sprays are water soluble and the effects of spraying will be
lost by washing in water, but there may still be staining.
Do not use outside in wet weather.
fabrics with a good quality clothes detergent and use stain remover if
necessary; follow manufacturer’s instructions. Wash non-absorbent
surfaces such as plastic, with mild detergent and water. Methylated
spirits can be effective in removing ageing spray but may cause damage;
follow manufacturer’s instructions.