Dirty Down Sprays 400ml

Dirty Down Sprays 400ml
 Click on the image to zoom
Dirty Down Sprays 400ml

Quantity

Out of Stock Out Of Stock

Realistic frost & snow effects spray for use on costumes and props.

  • Press nozzle gently for a light dusting of frost/snow.
  • Fully depress nozzle to spray a thicker layer of snow.
  • Build up layers of snow by spraying more coats.
  • Apply to almost any surface including fabrics, costumes, glass, furniture, metal etc.
  • Ozone friendly.

Instructions for Use:

  • The spray can must be at room temperature to work, not cold. The nozzle may not work if the spray can is cold. For best results, store overnight at room temperature before use.
  • Shake the spray can with the ball bearing rattling before each application of snow spray. The ball bearing will not rattle if the spray can is too cold and the spray can may not spray.
  • To clear the nozzle and prevent blocking, after each application of snow spray hold the spray can upside down and spray it for one second (while upside down).
  • If the spray can will not spray, the red nozzle on top of the spray can may be blocked. To clear the blockage, pull the red nozzle off the top of the spray can and place it in very hot, (just boiled) water for a few minutes. Do not place the entire spray can in very hot water, only the red nozzle.
  • Ensure surfaces are dry and grease free.
  • Mask areas not to be sprayed.
  • Snow spray may stain/damage some surfaces.
  • For a thin even layer of snow hold can upright 30cm (300mm) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed, (the spray comes out of the nozzle very fast). For thicker layers of snow apply several coats.
  • For small piles of snow, hold the spray can closer to the surface and apply snow spray to small areas at a time with the nozzle fully depressed.
  • Gently press nozzle for a light dusting of frost/snow.
  • For patches, spray through a hole cut in a piece of paper.
  • Practice spraying on disposable items before final use.
  • Test before use on hidden surfaces/off-cuts for compatibility and adhesion.
  • To make snow permanent, apply fixative/varnish spray between coats of snow as well as over the last coat.
  • Remove snow from smooth surfaces such as glass by scrapping off excess snow and wiping with a dry cloth and wax based polish. Do not use soap and water. Snow sprayed onto rough surfaces is more difficult to remove.

400ml

FLAMMABLE ITEM SHIPPED UK ONLY 

£9.9583
(aprox $16.6319)
Featured Products
On Offer
Ice FX Makeup
Student Mini Kit
£12.50
Screenface Body & Face  Painting Kit
New Introductory Kit - 35% savings !
£81.6667
RRP: £124.1667
SAVE: £42.50
Kryolan Sale Items
Fantastic Offers Available
£24.9083
RRP: £35.5833
SAVE: £10.675
Kryolan Aquacolor Metallic
15ml
£5.0417
RRP: £10.0833
SAVE: £5.0416
Kryolan Aquacolor Dayglow
15ml
£7.4667
RRP: £10.6667
SAVE: £3.20
Kryolan Aquacolor Interferenz
15ml
£7.7583
RRP: £11.0833
SAVE: £3.325
Kryolan Tuplast 15ml
*SELL BY FEB. 2020*
£4.1667
RRP: £17.0833
SAVE: £12.9166
Kryolan Aquacolor  Base Colors
15ml
£3.4583
RRP: £6.9167
SAVE: £3.4584
Sherman Laboratories
Pro-Stick Prosthetic Adhesive
£14.125
RRP: £17.6667
SAVE: £3.5417
Screenface
Luxury Blender Sponge
£0.8333
RRP: £2.9167
SAVE: £2.0834