PS Composites Latex

PS Composites Latex
 Click on the image to zoom

Quantity

In Stock In Stock

Latex, is a natural air drying liquid rubber easily used to produce thin skinned, highly elastic moulds.

A former (original model) is simply dipped into the liquid latex. 

A thin film of latex will cling to the former, and dipping is repeated until a skin of the required thickness is built up.. Immerse the former slowly in the latex, making sure the liquid flows in all dents and undercuts, then remove the former and allow to dry for a few minutes, then repeat the process five or six times to build up a significant thickness. 

After dipping, the mould should be left to dry thoroughly before removing from the former. 

Drying will take about 24 hours at 24oC, longer at lower temperatures. 

Higher temperatures should not be used if over dried, the latex loses its elasticity. 

Once dry, the mould should be rinsed in diluted washing- up liquid, then peeled from the former. 

Before turning back the right way, dust the mould with talc.

£11.25
(aprox $18.7892)
Featured Products
On Offer
Spraycraft
Universal Dual Action Airbrush SP60
£33.3333
RRP: £70.825
SAVE: £37.4917
Sparmax Compressor
TC - 501ARC
£62.2917
RRP: £94.1667
SAVE: £31.875
Sparmax Mini Compressor
AC-27
£73.325
RRP: £112.8167
SAVE: £39.4917
Sparmax Compressor
TC-610H Achieve
£128.025
RRP: £196.9583
SAVE: £68.9333
Malleable Head Block
*End of Line Offer*
£20.8333
RRP: £50.00
SAVE: £29.1667
Malleable Head Block
*End of Line Offer*
£16.6667
RRP: £37.50
SAVE: £20.8333
Kryolan Tuplast 15ml
*SELL BY FEB. 2020*
£13.6667
RRP: £17.0833
SAVE: £3.4166
Ramer Classic Cosmetic Sponge
Large 7cm
£1.3333
RRP: £2.6667
SAVE: £1.3334
Ramer Classic Cosmetic Sponge
Small 5cm
£1.1667
RRP: £2.3333
SAVE: £1.1666
Malleable Chin Block
*End of Line Offer*
£29.1667
RRP: £59.125
SAVE: £29.9583
Screenface
Luxury Blender Sponge
£0.8333
RRP: £2.9167
SAVE: £2.0834